Product SKUs

MBD-X11SSW-F
X11SSW-F
(Bulk Pack)

Physical Stats

Form Factor
Proprietary
Dimensions
8" x 13" (20.32cm x 33.02cm)

Processor/Cache

CPU
Intel® 7th/6th Generation Core i3 series
Intel® Celeron®
Intel® Pentium®
Intel® Xeon® processor E3-1200 v5 series
Socket H4 (LGA 1151) supported; CPU TDP support 80W
Note
BIOS version 2.0 or above is required to support Kaby Lake processors

System Memory

Memory Capacity
64GB Unbuffered ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type
2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes
4GB, 8GB, 16GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset
Intel® C236
SATA
Intel® C236 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1, 5,10
Network Controllers
Dual LAN with Intel® Ethernet Controller I210-AT
Graphics
Aspeed AST2400 BMC

Input / Output

USB
6 USB 2.0 ports (2 rear, 4 via header(s))
5 USB 3.0 ports (2 rear, 2 via header(s), 1 Type A)
Video Output
1 VGA
1 Aspeed AST2400 BMC
Serial Port / Header
2 COM Ports (1 rear, 1 header(s))
TPM
TPM Header

Expansion Slots

PCI-E
1 PCI-E 3.0 x16 Left Riser Slot
1 PCI-E 3.0 x4 (in x16 slot)
M. 2 Interface: PCIe 3.0 x4 and SATA
M. 2 Form Factor: 2260, 2280, 22110

System BIOS

BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
ACPI 1.0 / 2.0 / 3.0 / 4.0
APM 1.2
DMI 2.3
Hardware BIOS Virus protection
PCI 2.3
Plug and Play (PnP)
RTC (Real Time Clock) Wakeup
SMBIOS 2.7. 1
UEFI 2.3. 1
USB Keyboard support

Management

Software
Intel® Node Manager, IPMI2.0, NMI, SPM, SSM, SUM, SuperDoctor® 5, Watchdog
Power Configurations
ACPI Power Management
Power-on mode for AC power recovery

PC Health Monitoring

Voltage
+12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
FAN
6x 4-pin fan headers (up to 6 fans), Fan speed control, Overheat LED indication, Thermal control tachometer fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI
LED
UID/Remote UID
CPU / System Overheat LED
Other Features
Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M. 2 NGFF connector, WOL

Operating Environment

Operating Temperature Range
0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)

Így is ismerheti: X 11 SSW F, X11SSWF, X11SSW F, X 11SSW-F

Galéria