A Plinius közel 40 év tapasztalattal rendelkezik a High End erősítő fejlesztésben, amit az erősítők által nyert megszámlálhatatlanul sok elirmerés is tükröz. Plinius Hiato High End integrált sztereó erősítő valóban egy csúcskategóriás erősítő, ami kifinomult hangjának, hatalmas teljesítményének, gyönyörű vonalvezetésének köszönhetően mindenképpen kerüljön fel a bakancslistára sztereó erősítő vásárlásakor. Plinius Plinius Hiato High End integrált sztereó erősítő tulajdonságai: POWER 300 watts RMS per channel into 8 ohms 450 watts RMS per channel into 4 ohms Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion FREQUENCY RESPONSE 20Hz to 20kHz ±0.2dB -3dB at 70kHz DISTORTION Typically <0.05% THD at rated power 0.1% THD and IM worst case prior to clipping CURRENT OUTPUT 50A short duration peak per channel Fuse protected SLEW RATE Typically 5s HUM & NOISE 90dB below rated ouput 20Hz to 20kHz unweighted POWER/CURRENT CONSUMPTION 800W 0.6A (138W) Class AB Idle 0.3A (69W) Standby OPTIONAL PHONO INPUT RCA Unbalanced INPUT CAPACITANCE 100pF ADJUSTABLE GAIN 50dB, 56dB, 60dB, 66dB ADJUSTABLE LOAD 47k ohms, 470 ohms, 100 ohms, 47 ohms, 22 ohms DIMENSIONS Height: 170mm (7 1/2) Width: 450mm (17 3/4) Depth: 455mm (17 3/4) Weight: 25kg (56lb) Optional Phono Stage The preamplifier can be fitted with an optional phono stage based on a scaled version of the Koru design. The Phono has four gain settings and five loading settings to allow for suitable cartridge matching. Line Out The Line out provides a line level output, carrying the selected source signal. The Line Out allows for the signal to go on to recording equipment, headphone amplifiers or sub-woofer speakers. Remote Trigger Input and Output Terminals for remote trigger connection allow a processor signal to bypass the preamplifier stage or instigate the power amp to come out of standby. RC5 input The RC5 input allows for connection to wired remote interfaces so it can be used as part of an automated system. Ground Lift Switch This allows for the signal ground to be isolated from the main chassis earth. This can assist in resolving unwanted ground loops or hum due to duplicate ground paths in some systems. WBT and Neutrik Connectors High quality WBT RCA and Neutrik XLR input connectors are fitted along with WBT output speaker terminals to ensure low distortion interface between your cables and the amplifier. Auricap capacitors Audience AV supply the Auricap XO capacitors used in key areas of the circuit. The Auricap was chosen for its superior clarity and dynamic ability. Siltech Wiring Siltech premium 'G7' silver/gold wire provides a perfect connection between components to give clear, fast and detailed presentation of the music signal. Auric Wiring Audience AV supply the Auric OFC wire used in the input stage of the amplifier. The Auric was chosen for its high workability and natural sound. Aluminium Construction. The aluminium lid and panels provide a non-magnetic cover to reduce unwanted magnetic fields that can interfere with the sensitive audio signals.

Galéria