Supermicro SYS-1026TT-iBQF

Supermicro SYS-1026TT-iBQF

Supermicro SYS-1026TT-iBQF

Ezt a terméket egyik partnerünk sem forgalmazza. Kérjük, válasszon az alábbi termékek közül!

Amik még érdekelhetik

Termékleírás
RoHS: RoHS Compliant Height (mm): 43mm Width (mm): 437mm Depth (mm): 705mm Gross Weight (kg): 1kg Available Colors: Black Fans: 6x Cooling Fans Buttons: Power On/Off buttonSystem Reset button LEDs: Power LEDHard drive activity LED2x Network activity LEDsSystem Overheat LED Hot-swap: "4x 2.5"" SATA Hot-swap drive bays" AC Input: 1000W Output @ 100-140V, 11.5-8A, 50-60Hz1200W Output @ 180-240V, 8-5.5A, 50-60Hz Form Factor: 1U Rackmount CPU: Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 6-Phase-switching voltage regulator Memory Capacity: 12x 240-pin DIMM socketsSupports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memorySupports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memoryMemory Mirroring supported Memory Type: 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes: 1GB, 2GB, 4GB , 8GB** , 16GB** Memory Voltage: 1.5 V Chipset: Intel 5520 SATA: Intel ICH10R SATA 3.0Gbps ControllerRAID 0, 1, 5, 10 support Network Controllers: Intel® 82576 Dual-Port Gigabit Ethernet ControllerSupports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 outputIntel® I/OAT 3 support for fast, scaleable, and reliable networkingVMDq support for better performance of virtualization1x Re Graphics: Matrox G200eW 16 MB DDR2 Super I/O: Winbond W83527HG chip Serial ATA: Six Serial ATA portsSix SATA hard drives supported LAN: 2x RJ45 LAN ports1x RJ45 Dedicated IPMI LAN port USB: 2 rear + 1 header (2 Ports)4 total USB ports, 2.0 Compliant / 1.1 Compliant VGA: 1x VGA Port BIOS Type: 32Mb SPI Flash EEPROM with AMI® BIOS BIOS Features: Plug and Play (PnP)PCI 2.2ACPI up to 3.0USB Keyboard support PCI-Express: 1 (x16) PCI-E ( Low Profile) Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM supportSuperDoctor® IIIWatch DogNMI Power Configurations: ACPI Power ManagementMain Switch Override MechansimPower-on mode for AC power recovery FAN: Total of four 4-pin PWM fans4x fans with tachometer monitoringStatus monitor for speed controlStatus monitor for on/off controlLow noise fan speed control Temperature: Monitoring for CPU and chassis environmentCPU thermal trip supportThermal Control for 4x Fan ConnectorsPSU I2C temperature sensing logicThermal Monitor 2 (TM2) supportPECI LED: Power Fail / Overheat LEDSuspend-state Indicator LEDUID LED Other Features: SDDC Support IPMI: Support for Intelligent Platform Management Interface v. 2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN supportNuvoton WPCM450 BMC Clock Generator: 932S421 chip Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)Supports Intel® x4 and x8 Single Device Data Correction (SDDC) Model: CSE-809TQ-1200B : Serial Port: 1 Fast UART 16550 serial port Certification: 80 PLUS Gold Certified [ Test Report ] DC Output: 1000W: +12V/83A +5Vsb/4A1200W: +12V/100A +5Vsb/4A Environmental Spec. : Operating Temperature: 10° to 35° C (50° to 95°F)Non-operating Temperature: -40° to 70° C (-40° to 158° F)Operating Relative Humidity: 8% to 90% (non-condensing)Non-operating Relative Humidity: 5 to 95% (non-condensing) QPI: up to 6.4 GT/s Infiniband: 1 External QSFP Infiniband Connector

Így is ismerheti: SYS 1026 TT iBQF, SYS1026TTiBQF, SYS 1026TT iBQF, SYS 1026TT-iBQF, SYS-1026TT iBQF

Galéria

Vélemények

Oldalainkon a partnereink által szolgáltatott információk és árak tájékoztató jellegűek, melyek esetlegesen tartalmazhatnak téves információkat. A képek csak tájékoztató jellegűek és tartalmazhatnak tartozékokat, amelyek nem szerepelnek az alapcsomagban. A termékinformációk (kép, leírás vagy ár) előzetes értesítés nélkül megváltozhatnak. Az esetleges hibákért, elírásokért az Árukereső nem felel.