Product SKUs

MBD-X8ST3-F -O
X8ST3-F (Standard Retail Pack)
MBD-X8ST3-F -B
X8ST3-F (Bulk Pack)

Physical Stats

Form Factor
ATX
Dimensions
12" x 10" (30.5cm x 25.4cm)

Processor/Cache

CPU
LGA 1366 Socket
Intel® Core i7 990X, i7-980X, i7-975 and i7-965 Extreme Edition
Intel® Core i7 series
Intel® Xeon® 5600/5500 series
Intel® Xeon® 3600/3500 series
System Bus
QPI (up to 6.4 GT/s)

System Memory

Memory Capacity
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
Three Channel memory bus
6 DIMM sockets
Memory Type
1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
256MB, 512MB, 1GB, 2GB, 4GB
Memory Voltage
1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset
Intel® X58 Express chipset
ICH10R
SAS
LSI SAS1068E
RAID 0, 1, 10 support
(Optional: AOC-IButton68) RAID 5 support
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management Interface v. 2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
Network Controllers
2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
Matrox G200eW 16 MB DDR2
Super I/O
Winbond 83627DHG chip
Clock Generator
CK505

Input / Output

SAS
8 SAS / SATA ports
Serial ATA
6 SATA ports
6 SATA hard drives supported
Floppy
1 Floppy controller; 1.44 MB
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB rear ports
2x USB on-board
2x USB internal headers (4 ports)
Total 8 USB 2.0 Compliant
VGA
1x VGA port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Port / Header
1x Fast UART 16550 serial port
1x internal header

I/O Panel

Please see this board's I/O Panel

OS Compatibility

Please see our OS Compatibility Chart

Chassis ( Optimized for X8ST3-F )

2U Chassis
CSE-213A-R900LPB
CSE-216A-R900LPB
CSE-216E1-R900LPB
CSE-216E2-R900LPB
CSE-822T-400LPB
CSE-825MTQ-R700LPB
CSE-825TQ-560LPB
CSE-825TQ-R700LPB
CSE-826TQ-R800LPB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.

Expansion Slots

PCI-Express
3 (x8) PCI-e 2.0 slots (1 using x16 slot)
1 (x4) PCI-e slot (using x8 slot)
PCI
2x 32-bit PCI slot

System BIOS

BIOS Type
32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3

Management

Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Internal/External modem ring-on

PC Health Monitoring

Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of five fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
+5V Standby alert LED
Other Features
Chassis intrusion detection
Chassis intrusion header

Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

Így is ismerheti: X 8 ST 3 F, X8ST3F, X8ST3 F, X 8ST3-F

Galéria