Product SKUs

MBD-H8QGi-F
H8QGi-F (Standard Retail Pack)

Physical Stats

Form Factor
SWTX
Dimensions
16.48" x 13" (41.9cm x 33.0cm)

Processor/Chipset

CPU
Quad 1944-pin Socket G34
Supports up to four 16/12/8/4-Core ready AMD Opteron 6000 Series processors
HT3.0 Link support
Chipset
AMD SR5690/SR5670/SP5100 Chipset

System Memory

Memory Capacity
32 DIMM sockets
Supports up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
Quad channel memory bus
For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
See Detailed Memory Support Matrix
Memory Type
Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
1.35V or 1.5V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

SATA
AMD SP5100 (RAID 0, 1, 10)
IPMI
Support for Intelligent Platform Management Interface v. 2.0
IPMI 2.0 with virtual media over LAN and KVM over LAN support
Winbond® WPCM450 BMC
Network Controllers
Intel® 82576 controller, Dual-Port
Gigabit Ethernet
10/100/1000BASE-T support
VGA
Matrox G200 16MB DDR2 graphics
Super I/O
Winbond® W83527 chip

Input / Output

SATA
6x SATA2.0 (3Gb/s) Ports
LAN
2 RJ45 LAN ports
1 RJ45 Dedicated LAN supports IPMI
USB
7x USB 2.0 ports
2x Rear, 4x internal header, and 1x type A
VGA
1x VGA port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x serial port header
Others
1 SATA DOM power connector, TPM header

Expansion Slots

PCI-Express
2 PCI-E 2.0 x16
1 PCI-E 2.0 x8
1 PCI-E 2.0 x8 or 1 UIO slot

Chassis ( Optimized for H8QGi-F )

1U Chassis
CSE-818TQ-1400LPB
Requires rev. K chassis, air shroud MCP-310-81807-0B*
2U Chassis
CSE-828TQ+-R1400LPB
Requires rev. K chassis, air shroud MCP-310-82801-0N*
CSE-828TQ+-R1K43LPB
Requires rev. K chassis, air shroud MCP-310-82801-0N*
Tower / 4U Rackmount
CSE-418E16-R1K62B
Requires air shroud MCP-310-84802-0B*
CSE-748TQ-R1400B
Requires rev. K chassis, air shroud MCP-310-74802-0B*
CSE-748TQ-R1K43B
Requires rev. K chassis, air shroud MCP-310-74802-0B*
CSE-848A-R1K62B
Requires air shroud MCP-310-84802-0B*
CSE-848E16-R1K62B
Requires air shroud MCP-310-84802-0B*
Note
* Sold separately, please refer to the chassis web spec for the air shroud info in the optional part list.

Server(s) ( with H8QGi-F )

Model(s)
AS -2042G-TRF
AS -4042G-TRF

System BIOS

BIOS Type
16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
USB Keyboard Support
SMBIOS 2.3

Management

Software
IPMI (Intelligent Platform Management Interface) 2.0
Super Doctor III
Power Configurations
ACPI Power Management
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery

PC Health Monitoring

CPU
Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset
CPU switching voltage regulator
FAN
Up to 9-fan status tachometer monitoring
Up to nine 4-pin fan headers
Status monitor for speed control
3-pin fan support (w/o speed control)
Low noise fan speed control
(4-pin fan only)
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 9x fan connectors
I2C Temperature Sensing Logic
LED
CPU / System Overheat LED
+5V Standby Alert LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header

Operating Environment / Compliance

RoHS

RoHS 6/6
RoHS Compliant 6/6, Pb Free
Environmental Specifications
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

OS Compatibility

Please see our OS Compatibility Chart

Regulatory

FCC
Passed to meet FCC standard requirement

Így is ismerheti: H 8 QGi F, H8QGiF, H8QGi F, H 8QGi-F

Galéria