Thermaltake Frio Advanced CLP0596

Thermaltake Frio Advanced CLP0596

18 847 Ft-tól 6 ajánlat
Megközelítés:
Javasolt útvonal:  

További ajánlataink

Termékleírás
Típus  Aktív hűtő
Hűtő típusa Processzor
Ventilátor fordulatszáma 2000 rpm
Levegőáramlás  88.77 CFM
Méretek 131 x 122 x 159 mm
Súly 954 g

Hibát talált a leírásban vagy az adatlapon? Jelezze nekünk!

Features - Heat-pipe Direct Touch Technology, Supports 230W Cooling Performance
- Dual 13cm Over-clocking Fan, PWM controllable with 800~2,000 RPM Speed
- Universal Socket Compatibility & Accessory Package Detailed Feature Heat-pipe Direct Touch Technology, Supports 230W Cooling Performance - 5 x Ø6 mm heat-pipes direct touch CPU surface increasing heat conductivity.
- High density Aluminum fins allow larger surface area to quick dissipate heat.
- Premium thermal grease maximizes heat transfer from the CPU into the cooler base for rapid dissipation. Dual 13cm Over-clocking Fan, PWM function with 800~2,100 RPM Speed - A pair of high performance red bladed fans generate excellent cooling power.
- Tool-less fan installation provides great convenience for users.
- Vibration-absorbent gaskets decrease noise during operation.
- Fan speed at the lowest RPM provides good performance and very low noise. Universal Socket Compatibility & Accessory Package - All-in-one back-plate design, offers support for all Intel and AMD platforms
- Universal socket support : Intel: LGA 2011, LGA1366, LGA1156, LGA1155, LGA775AMD: FM1, AM3+, AM3, AM2+, AM2  Dimension Intel Motherboard Installation Step 1 Step 2 Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers. Step Two: Put the two Intel mounting bars along the four long screws and secure them with four nuts. Step 3 Step 4 Step Three: Remove two fans from the cooler before installation. Step Four: Securing the two T-mounting bars to the base of cooler by short screws. Step 5 Step 6 Step Five: Applying a thin layer of thermal greaseStep Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly. Step 7 Step 8 Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a click sound. Repeat steps for the other fan. Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done. AMD Motherboard Installation Step 1 Step 2 Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers. Step Two: Put the two AMD mounting bars along the four long screws and secure them with the four nuts. Step 3 Step 4 Step Three: Remove two fans from the cooler before installation. Step Four: Securing the two T-mounting bars to the base of cooler by short screws. Step 5 Step 6 Step Five: Applying a thin layer of thermal greaseStep Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly. Step 7 Step 8 Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a click sound. Repeat steps for the other fan. Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done. Airflow Chart Így is ismerheti: Frio Advanced CLP 0596, FrioAdvancedCLP0596
Vélemények
Kérdezz felelek

Oldalainkon a partnereink által szolgáltatott információk és árak tájékoztató jellegűek, melyek esetlegesen tartalmazhatnak téves információkat. A képek csak tájékoztató jellegűek és tartalmazhatnak tartozékokat, amelyek nem szerepelnek az alapcsomagban. A termékinformációk (kép, leírás vagy ár) előzetes értesítés nélkül megváltozhatnak. Az esetleges hibákért, elírásokért az Árukereső nem felel.

^