Wharfedale Diamond 10.LCR Hangfal

Wharfedale Diamond 10.LCR Hangfal

Ezt a terméket egyik partnerünk sem forgalmazza. Kérjük, válasszon az alábbi termékek közül!

További termékek a kategóriából

További Wharfedale termékek: Wharfedale Hangfal

Yamaha NS-C444 Hangfal 84 990 Ft-tól Yamaha NS-C444 Pioneer S-LX70C Hangfal 203 500 Ft-tól Pioneer S-LX70C Pioneer S-8EX Hangfal 799 000 Ft-tól Pioneer S-8EX Canton Ergo 655 Center Hangfal 254 990 Ft-tól Canton Ergo 655 Center
Termékleírás
Hangfal típusa Center hangfal
Álló hangfal Nem

Hibát talált a leírásban vagy az adatlapon? Jelezze nekünk!

Termékeink tiszta forrásból, a Magyarországi importőrön keresztül érkeznek. Így biztosított csak a 5 év hivatalos garancia. A Wharfedale  termékek esetében országos szerviz garancia biztosított, így Önnek egy esetleges meghibásodáskor a terméket a legközelebbi szervizbe fogják szakszerűen megjavítani, megfelelő termék, és alkatrész támogatással. Termékeinket ingyenesen a Royal Sprint futárszolgálat szállítja házhoz a legnagyobb odafigyeléssel, hogy ne sérüljön meg a kedvenc új terméke hazaérkezése előtt.

A Wharfedale hangfalak esetében listaáras megjelenítést alkalmazunk. Amennyiben a termék felkeltette az érdeklődését, vágyik rá, de esetleg látta olcsóbban, vagy csak szeretne egy picit spórolni, abban az esetben kérjen tőlünk egy ajánlatot rá, és mi a körülményekhez képest megpróbálunk egy kedvezőbb árat biztosítani. Hívjon fel, vagy küldjön egy e-mailt nekünk, és mi a leghamarabb válaszolunk rá.

Termék leírás:

Kétutas LCR (front és center) hangsugárzó

Hangszórók

4 db 100 mm átmérőjű mély-közép hangszóró

3 db 25 mm átmérőjű magassugárzó

Ajánlott erősítő teljesítmény: 20-120 W

Érzékenység: 85 dB

Frekvencia átvitel: 65 - 24000 Hz

Impedancia: 6 Ohm

Méretek: 1000 x 162 x 168 mm

Színválaszték: fekete

Transducer Complement
2-way

 
Format
Soundbar

 
Bass/Mid
4" 100mm (L); 4" 100mmx2 (C); 4" 100mm (R)

 
Tweeter
25mm tex

 
Power Handling
20 - 80w (L); 20 - 120w (C); 20 - 80w (R)

 
A/V Shield
yes

 
Nominal Impedance
6

 
Sensitivity (2.83V @ 1M)
85dB

 
Frequency Range at -6 dB
75 Hz – 24 kHz (L); 65 Hz – 24kHz (C); 75 Hz – 24 kHz (R)

 
Cabinet Size(mm)
-

 
H
162.5

 
W
1000

 
D
168

 
Packing
single

 
Nett weight
10.6Kg

 
Gross weight
11.4Kg

 
Finishes(vinyl)
Blackwood/Rosewood Quilt/Walnut Pear/Cinnamon Cherry/Winter Maple/Cool Maple/Wenge

 


  • Winter Maple

  • Wenge

  • Walnut Pearl

  • Rosewood Quilted

  • Cool Maple

  • Cinnamon Cherry



Curved braced cabinet: Diamond 9 has a strong, inert, curved and braced cabinet design to reduce cabinet vibration, which reduces colouration, and encourages rapid dissipation of ‘standing waves’ created from rear cone movements reflecting inside the cabinet.

 
 

 



 

 

Crossover: A simple crossover design can maintain phase coherency through the midrange and hence eliminate the negative effects that are introduced where driver correction is needed.

Tweeters: The tweeters use high power ‘rare-earth’ magnets for high resolution and accuracy. This provides the most linear and the fastest response possible response.

 
 

 
 

Improvements to the mid/bass drive unit: To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole.

Tweeter diffuser: Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing.

Low Profile Chassis: The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion.   Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves.

 

Offset Bi-Wire Terminals: Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.



 

 

 


Így is ismerheti: Diamond 10 LCR, Diamond10LCR, Diamond 10. LCR

Galéria

Vélemények

Oldalainkon a partnereink által szolgáltatott információk és árak tájékoztató jellegűek, melyek esetlegesen tartalmazhatnak téves információkat. A képek csak tájékoztató jellegűek és tartalmazhatnak tartozékokat, amelyek nem szerepelnek az alapcsomagban. A termékinformációk (kép, leírás vagy ár) előzetes értesítés nélkül megváltozhatnak. Az esetleges hibákért, elírásokért az Árukereső nem felel.